Not always. You do not automatically need a line output converter to add an amplifier to your factory stereo. The correct integration method depends on the factory audio system, the amplifier being installed and whether the new amplifier or DSP can accept the signal coming from the vehicle.
A line output converter, often called a LOC, is used to convert a factory speaker-level signal into a low-level RCA signal. This can be useful when you want to add an aftermarket amplifier but the factory stereo does not have RCA preamp outputs. Many original factory head units only provide speaker outputs, so a converter may be needed if the aftermarket amplifier only accepts low-level RCA input.
However, many modern car audio amplifiers and DSP amplifiers now accept high-level speaker inputs directly. This means the amplified signal from the factory stereo can be connected straight into the amplifier or DSP, without using a separate basic line output converter. Focal’s Impulse 4.320, for example, includes both high-level and low-level input selection, allowing it to be integrated with compatible factory or aftermarket source units.
High-level inputs can make factory integration cleaner because they are designed to accept the stronger speaker-level signal already present in the vehicle. In suitable systems, this can reduce the number of separate devices required and help retain the factory head unit, steering wheel controls, infotainment screen and vehicle functions.
That said, high-level input compatibility does not mean every factory system is simple. Modern vehicles can use factory amplifiers, active speaker outputs, factory equalisation, load detection, warning tones, Active Noise Cancellation, artificial engine sound and other audio processing. These features can affect how the signal behaves and whether a direct high-level connection is the best method.
A line output converter may still be required if the chosen amplifier only accepts RCA input. In that case, the LOC takes the factory speaker-level signal and converts it into a lower-voltage signal suitable for the amplifier’s RCA inputs. This allows an aftermarket amplifier to be added while keeping the factory stereo in place.
The quality of the line output converter matters. A basic converter may work in simple systems, but it may not provide the cleanest or most stable signal. A better integration device can reduce noise, provide more stable output voltage, improve channel balance and help avoid issues such as alternator whine, signal dropouts or distorted input.
Focal’s HILO V3 is an example of a high-level to low-level converter designed for this type of integration. It converts an amplified factory signal into a low-level stereo RCA output, helping provide a usable signal for a compatible aftermarket amplifier while retaining the original car radio and controls.
In more complex vehicles, a simple LOC may not be enough. Some factory audio systems do not provide a full-range signal on one pair of speaker wires. One channel may carry only bass, another may carry midrange and another may carry treble. In this situation, a DSP or advanced integration processor may be needed to sum, correct or process the factory signals before sending them to the new amplifier.
Factory equalisation is another important issue. Some factory stereos deliberately boost or reduce certain frequencies to make the original speakers sound better. If that processed signal is sent directly to an aftermarket amplifier, the new speakers may sound unbalanced unless the signal is corrected with DSP tuning.
Load detection can also affect integration. Some factory head units or amplifiers check whether speakers are connected. If an aftermarket amplifier is added and the factory system no longer sees the expected load, it may reduce output, mute channels or create error behaviour. Some integration devices are designed to help manage these situations.
Signal turn-on is another consideration. Some amplifiers can turn on automatically when they detect high-level signal. Others may require a remote turn-on wire. A good integration plan will confirm how the amplifier will power on and off cleanly without pops, delays or battery drain.
The safest approach is to choose the integration method after the vehicle has been assessed. In a simple non-amplified factory system, a high-level input amplifier may be sufficient. In a system using an amplifier with RCA-only inputs, a quality LOC may be required. In a premium factory amplified system, a DSP or vehicle-specific integration solution may be the better choice.
For the best result, speak with an Authorised Focal Australia Dealer before purchasing an amplifier or line output converter. They can test your factory stereo, confirm whether the signal is full-range or processed, check whether high-level inputs are suitable, and recommend the correct Focal amplifier, LOC, DSP or integration method for your vehicle.

