by Matthew Doepel | 10 May, 2026 | All Topics, Speakers, Subwoofers, Technical
Sound deadening is the process of applying specialised acoustic treatment materials inside a vehicle to reduce vibration, road noise, panel resonance and unwanted rattles. In car audio, it is one of the most effective ways to improve speaker performance and overall...
by Matthew Doepel | 10 May, 2026 | All Topics, Amplifiers, Speakers, Technical
You do not always need an amplifier for car speakers, but adding one can significantly improve sound quality, volume, clarity and overall system performance. Many factory head units can power replacement speakers, but they often have limited output and may struggle to...
by Matthew Doepel | 10 May, 2026 | All Topics, Technical
Speaker sensitivity measures how efficiently a speaker converts amplifier power into sound. It is usually expressed in decibels, or dB, and helps indicate how loud a speaker can play from a given amount of power. In simple terms, a speaker with higher sensitivity can...
by Matthew Doepel | 10 May, 2026 | All Topics, Technical
RMS power, or Root Mean Square power, refers to the continuous amount of power a car speaker or subwoofer can safely handle during normal use. It is one of the most important specifications to understand when matching speakers, subwoofers and amplifiers in a car audio...
by Matthew Doepel | 10 May, 2026 | All Topics, Technical
Frequency range refers to the span of sound frequencies a speaker is designed to reproduce. It is usually measured in Hertz, or Hz, and helps indicate which part of the audio spectrum a speaker can handle. For example, a speaker rated from 60Hz to 20kHz is designed to...
by Matthew Doepel | 10 May, 2026 | All Topics, Technical
Xmax stands for maximum linear excursion. It refers to how far a speaker or subwoofer cone can move forward and backward while still producing clean, controlled sound with low distortion. In car audio, Xmax is especially important for subwoofers because bass requires...
by Matthew Doepel | 10 May, 2026 | All Topics, Technical
Mms refers to the moving mass of a speaker or subwoofer. This includes the weight of the cone, voice coil, dust cap, suspension components and the air load that moves with the speaker during operation. In simple terms, Mms helps describe how much physical mass the...
by Matthew Doepel | 10 May, 2026 | All Topics, Technical
Vas and Cms are Thiele-Small parameters that describe the compliance, or flexibility, of a speaker’s suspension system. These values help explain how easily a speaker cone moves and how the speaker may perform in different enclosure designs. Cms, or Compliance of...
by Matthew Doepel | 10 May, 2026 | All Topics, Technical
Qms, Qes and Qts are Thiele-Small parameters used to describe how well a speaker or subwoofer is controlled around its resonant frequency. These values help installers and system designers understand how a speaker may behave in different enclosure types, including...
by Matthew Doepel | 10 May, 2026 | All Topics, Technical
Fs, or resonant frequency, refers to the natural frequency at which a speaker or subwoofer vibrates most easily when operating in free air. It is one of the key Thiele-Small parameters used to understand how a speaker behaves before it is installed in a vehicle or...
by Matthew Doepel | 10 May, 2026 | All Topics, Technical
Thiele-Small parameters are a set of technical measurements used to describe how a speaker or subwoofer behaves, especially when installed in an enclosure. These specifications help engineers, installers and system designers understand how a driver will perform in...
by Matthew Doepel | 10 May, 2026 | All Topics, Focal Inside, Speakers, Subwoofers, Technical
Focal Inside speakers are designed to provide a high-quality Plug & Play car audio upgrade for selected vehicles, making them one of the easiest ways to improve factory sound without major modifications. The key benefit of Focal Inside is vehicle-specific...